Types of Resin Hose

Resin hose is an excellent choice for many applications. It is lightweight, flexible and resistant to many chemicals and solvents. You can choose from a variety of types depending on your chemical properties. You can also find steel wire and fiber braided high-pressure resin hose. Here are a few common applications for this type of hose.

Fiber Braided Duplex Resin Hose

Fiber Braided Duplex Resin Hoses are made from a thermoplastic plastic polymer called polypropylene. This material is durable and resistant to a number of chemicals. Post-sintering is used to reduce permeability and achieve high stiffness. This hose is then cut with a bevely shear, a hand or pneumatically-operated tool. The hose is preset in length and diameter to minimize length changes during fabrication.

In a hose made of fluoropolymers, the internal pressure does not cause the tube to pull off. When the tube is loose, it is called a pulled-down tube. This type of hose also features deburring. To determine the desired assembly length, the length of the fitting is subtracted from the hose. A design factor, which is based on the burst force of the hose, is used to determine the working pressure.

Steel wire braided high pressure resin hose

The tensile strength of steel wire braided high pressure resin hoses is much higher than conventional hoses. This type of hose can withstand up 160 MPa. Typical wire reinforcements are available in diameters ranging from 0.15 to 0.80 mm in steps of 0.05 mm. These wires are used for braided reinforcement layers and in spiralled hoses.

High pressure steel wire braid hoses are suitable for oil and liquid-based liquids. They are lightweight, weather resistant, and can withstand high pressure and vacuum. In addition, they are suitable for a variety of applications. This type of hose can have an adhesive layer added to increase strength and durability.

Steel wire braided high pressure resin hosing is an excellent choice for high-pressure filtration. They can be used in either a closed or open loop environment. They are versatile and available in many sizes and types.

Fiber Braided High Pressure Resin Hose

Fiber Braided High Pressure Resin Hoses are lightweight and extremely durable. This hose is only one-fourth the weight of comparable rubber hoses. It is also extremely flexible. These hoses are used in a wide range of industries.

Fiber Braided High Pressure Resin Hoses have multiple layers. The first layer is typically made from aramid fibers that are strong. The second braid is made of a high modulus fiber material. It is stronger and has lower stretch percentages, which allows it to better engage the second braid. This allows for a longer impulse life at higher pressures.

The second layer is reinforced with a third braid of reinforcement fiber material. This layer extends around the second braid. This is called a 3 over 3 braid design. The braid segments are arranged at an angle between 55 and 60 degrees.