Skip to content

Large-diameter rubber hose quality detection method

Large-diameter rubber hose is a kind of rubber hose that is widely used at present. It is currently used in the transportation of various media

Product Details: Transition Joints

Product Category:

Transition joints include: pair wire, tee, cross, 90° right angle, 45° angle.

Standard: JB Machinery Department standard, GB national standard standard

Thread form: Metric thread, British thread, American thread

Seals: combination pad seal, O-ring seal, PTFE pad seal, high temperature ring seal.

Anti-rust methods for carbon steel: galvanized, cast black.

British and American screw pitches are different.

Sealing form: A, B, C, D, F, H

For more product details, please leave a message to consult us!

Large-diameter rubber hose quality detection method

Large-diameter rubber hose is a kind of rubber hose that is widely used at present. It is currently used in the transportation of various media, so its quality is very important to people. The following editor will talk about the detection method of large-diameter rubber hose.

The detection of large diameter rubber hose generally has the following categories:

  1. Due to the large radius of curvature of the large-diameter rubber hose, people often use the contact method to detect it.
  2. For the automatic detection of large-diameter hoses, people usually use the local water immersion method. For the detection of tube delamination defects, a longitudinal wave straight probe or a double-element longitudinal wave straight probe is usually used for detection.
  3. For the detection of radial defects of large-diameter rubber hoses perpendicular to the axis, the axial detection is generally performed by using an oblique probe.
  4. For the radial defects of the large-diameter rubber hose parallel to the bamboo shaft, an angle probe is usually used for circumferential detection.