Skip to content

Storage of Diesel Gasoline Hose

Four points for storage of diesel and gasoline hoses: When storing diesel and gasoline hoses, they should be placed separately according to different varieties and product specifications of the enterprise, and no mixed stacking should occur, and signs should be marked for access. The warehouse for storing diesel and gasoline hoses should be kept clean… Read More »Storage of Diesel Gasoline Hose

Four points for storage of diesel and gasoline hoses:

  1. When storing diesel and gasoline hoses, they should be placed separately according to different varieties and product specifications of the enterprise, and no mixed stacking should occur, and signs should be marked for access.
  2. The warehouse for storing diesel and gasoline hoses should be kept clean and ventilated, the relative temperature should be lower than 80%, the warehouse temperature should be kept between -15°C-+40°C, and the hoses should avoid direct sunlight, rain and snow.
  3. When the high-pressure oil pipe is stored, it should not be in contact with acids, alkalis, oils and organic solvents or other corrosive ionic liquids and gases, and should be 1m away from heat sources.
  4. During the storage of high-pressure oil pipes, it is strictly forbidden to pile heavy objects on the pipe body, and prevent external factors from being squeezed and damaged.
    Installation rules of high pressure hose

The general product has a little error, so it inevitably gets shorter and longer. If a high-pressure rubber hose has a bent part after installation. No fixing device should be added at the bending position of the high-pressure hose. The high-pressure hose should be free to operate economically. Once it is fixed, it is easy to cause buckle wear.

  1. In order to avoid damaging the environment of the high-pressure hose and subject to certain restrictions, the bending radius of the high-pressure hose should be increased as much as possible.
  2. When installing a high-pressure hose, remember not to twist the high-pressure hose, otherwise it is easy to cause damage and the high-pressure hose or the crimped joint will loosen when it is under social pressure.
  3. When installing a high-pressure hose between objects, a certain space should be left to avoid trade friction between the high-pressure hose and the object during operation. Try to get some protection if you can’t avoid it.