Oilfield Drilling Rubber Hose

Oilfield drilling rubber hose has numerous applications. It is the main component that transports drilling fluid. This is usually water, oil or mud. Oilfield drilling hoses are made of a thin steel or aluminum alloy, with a rubber cover. This hose allows drilling fluid to flow through the bit and back up the annulus. Drilling hoses are used on mobile and stationary drilling rigs and are also used for damping vibrations in rotary plants.

Safety Ohm (SO), ground wires are embedded into the wall of the hose. To prevent static electricity, they must be grounded. There are three series: the standard SO, the low-stress SO, and the low-static OHMS. All are designed to protect against vapors that come from the combustion of gasoline, oil, and alternative fuels. These standards also apply rubber hoses. For more information, contact a manufacturer if your company requires a special hose to suit a specific application.

It is crucial to choose the right oilfield drilling rubberhose. These hoses must meet stringent requirements for safety, durability, and performance. These high-pressure liquids can be demanding on hoses, so many manufacturers have developed specific blends of hose material to combat the stresses. To avoid premature failure, you should choose drilling hoses with a rating of 400 psi. You should also inspect the termination ends of the drill hose. Crimping them will prevent drilling fluids from escaping.

The traditional use of hoses was redefined by the rise of the offshore oil and gas industry. These high-pressure applications required special hoses that were not manufactured by industrial hose manufacturers. Therefore, oil operators worked closely to develop and manufacture specialized products with local quality vendors. They were able to meet the needs of their customers and keep their costs down. This resulted in a more economical hose for offshore drilling. If you’re looking for a high-pressure drilling hose, check out the options we have for you.

Kelly hoses are another type of oilfield drilling rubber hose. Kelly hoses connect to the standpipe and drive. They allow the drill string to be raised and lowered vertically without causing any damage to the kelly. Kelly hoses are made from heavy-duty rubber and are available in a range of lengths. The minimum diameter is 3 inches and the maximum operating pressure is 5kpsi.