How to Install Corrugated Fuel Tank Hose

It is very important to properly connect the Fuel Tank Hose to the car. There are a few things you should keep in mind when installing this hose. First of all, it should have the correct length. It should also be able to reach the engine. The Fuel Tank Hose will allow your vehicle to run more efficiently once it is installed. Avoid leaking or clogging fuel while driving. After all, your vehicle will need to be protected from the elements, so you should take care of it properly.

Tap the Fuel Tank Hose lightly to simulate road shocks. Secondly, you should check the valve’s resistance. The value should be at least 200 ohm. If the reading is too high, the valve can be replaced with a new one. If you are unsure about the value of the valve, consult the owner’s manual and the dealer. You can also search online to find fuel tank hose diagrams if you don’t have this information.

Make sure to check the choke before you start your engine. A faulty choke may cause false readings. When checking for leaks, you must ensure that the ohmmeter reading is below 30 ohms. The ohmmeter should never be zero. The test lamp end should be connected to the choke cap’s attaching ring and the other to a positive ground. It’s a very good idea to take these measurements after the car is at a normal operating temperature before starting it.